P-CAD Design Rule Check Report ====================================================================== E:\n64\PROJECTS\CART2\RMULTI_CART.drc: Design Clearances (in mils): ------------------------------- Hole-Hole Clearance: 13.0mil Board Edge Clearance: Not Defined Silk Screen Clearance: Not Defined Layer Clearances (in mils): ------------------------------- Layer Name Pad-Pad Pad-Line Line-Line Pad-Via Via-Line Via-Via Top 8.0 10.0 10.0 20.0 8.0 10.0 Bottom 8.0 10.0 10.0 20.0 8.0 10.0 Net Class Clearances (in mils): ------------------------------- Net Class Name Pad-Pad Pad-Line Line-Line Pad-Via Via-Line Via-Via Net Clearances (In mils): ------------------------- Net Name Pad-Pad Pad-Line Line-Line Pad-Via Via-Line Via-Via Net Class To Net Class Clearances (in mils): -------------------------------------------- Net Class Names Pad-Pad Pad-Line Line-Line Pad-Via Via-Line Via-Via Area Checked: ------------- DRC Extents: Entire Workspace DRC Report Options: ------------------- Net List Compare: On Clearance Violations: On Text Violations: On Net List Violations: On Unrouted Nets: On Unconnected Pins: On Net Length Violations: On Silk Violations: Off Copper Pour Violations: On Plane Violations: On Component Violations: On Drill Violations: On Test Point Violations: Off ---------------------------------------------------------------------- 09-Feb-05 19:32 Page 1 P-CAD Design Rule Check Report ====================================================================== DRC Errors: ----------- NETLIST COMPARE: Netlist filename: E:\n64\PROJECTS\CART2\MULTI_CART.net 0 warning(s) detected. 0 error(s) detected. NETLIST VIOLATIONS: 0 warning(s) detected. 0 error(s) detected. CLEARANCE VIOLATIONS: 0 warning(s) detected. 0 error(s) detected. UNROUTED NETS: 0 warning(s) detected. 0 error(s) detected. UNCONNECTED PINS: Error 1 -- Unconnected pin: * Pad U3-7 at (3200.0,3300.0) mils Error 2 -- Unconnected pin: * Pad SW_FLASH-(unused) at (3500.0,3450.0) mils Error 3 -- Unconnected pin: * Pad SW_FLASH-(unused) at (3118.1,3450.0) mils Error 4 -- Unconnected pin: * Pad EEPROM1-2 at (5550.0,2300.0) mils Error 5 -- Unconnected pin: * Pad EEPROM1-7 at (5550.0,2000.0) mils Error 6 -- Unconnected pin: * Pad SW_EEPROM-(unused) at (5650.0,3350.0) mils Error 7 -- Unconnected pin: * Pad SW_EEPROM-(unused) at (5268.1,3350.0) mils Error 8 -- Unconnected pin: * Pad EEPROM2-2 at (5550.0,2700.0) mils Error 9 -- Unconnected pin: * Pad EEPROM2-7 at (5550.0,2400.0) mils Error 10 -- Unconnected pin: * Pad U1-7 at (3700.0,2150.0) mils Error 11 -- Unconnected pin: * Pad U1-22 at (3700.0,1850.0) mils Error 12 -- Unconnected pin: * Pad CIC1-5 at (5000.0,2150.0) mils Error 13 -- Unconnected pin: ---------------------------------------------------------------------- 09-Feb-05 19:32 Page 2 P-CAD Design Rule Check Report ====================================================================== * Pad CIC1-4 at (4900.0,2150.0) mils Error 14 -- Unconnected pin: * Pad CIC1-3 at (4800.0,2150.0) mils Error 15 -- Unconnected pin: * Pad CIC1-2 at (4700.0,2150.0) mils Error 16 -- Unconnected pin: * Pad CIC1-10 at (5200.0,1850.0) mils Error 17 -- Unconnected pin: * Pad CIC1-12 at (5000.0,1850.0) mils Error 18 -- Unconnected pin: * Pad CIC3-5 at (5000.0,3050.0) mils Error 19 -- Unconnected pin: * Pad CIC3-4 at (4900.0,3050.0) mils Error 20 -- Unconnected pin: * Pad CIC3-3 at (4800.0,3050.0) mils Error 21 -- Unconnected pin: * Pad CIC3-2 at (4700.0,3050.0) mils Error 22 -- Unconnected pin: * Pad CIC3-10 at (5200.0,2750.0) mils Error 23 -- Unconnected pin: * Pad CIC3-12 at (5000.0,2750.0) mils Error 24 -- Unconnected pin: * Pad SW_CIC-Y2 at (4892.5,3271.3) mils Error 25 -- Unconnected pin: * Pad SW_CIC-Y1 at (4971.3,3271.3) mils Error 26 -- Unconnected pin: * Pad SW_CIC-Y3 at (4656.3,3271.3) mils Error 27 -- Unconnected pin: * Pad SW_CIC-(unused) at (4553.9,3430.7) mils Error 28 -- Unconnected pin: * Pad SW_CIC-Y at (4813.8,3271.3) mils Error 29 -- Unconnected pin: * Pad SW_CIC-(unused) at (5073.6,3210.2) mils Error 30 -- Unconnected pin: * Pad U2-7 at (3700.0,2900.0) mils Error 31 -- Unconnected pin: * Pad U2-22 at (3700.0,2300.0) mils Error 32 -- Unconnected pin: * Pad CIC2-5 at (5000.0,2600.0) mils Error 33 -- Unconnected pin: * Pad CIC2-4 at (4900.0,2600.0) mils Error 34 -- Unconnected pin: * Pad CIC2-3 at (4800.0,2600.0) mils Error 35 -- Unconnected pin: * Pad CIC2-2 at (4700.0,2600.0) mils Error 36 -- Unconnected pin: * Pad CIC2-10 at (5200.0,2300.0) mils Error 37 -- Unconnected pin: * Pad CIC2-12 at (5000.0,2300.0) mils Error 38 -- Unconnected pin: * Pad E1-6 at (3692.1,1500.0) mils Error 39 -- Unconnected pin: * Pad E1-31 at (3692.1,1500.0) mils Error 40 -- Unconnected pin: * Pad E1-14 at (4479.5,1500.0) mils Error 41 -- Unconnected pin: * Pad E1-39 at (4479.5,1500.0) mils ---------------------------------------------------------------------- 09-Feb-05 19:32 Page 3 P-CAD Design Rule Check Report ====================================================================== Error 42 -- Unconnected pin: * Pad E1-45 at (5070.1,1500.0) mils Error 43 -- Unconnected pin: * Pad E1-46 at (5168.5,1500.0) mils Error 44 -- Unconnected pin: * Pad E1-23 at (5365.4,1500.0) mils Error 45 -- Unconnected pin: * Pad E1-24 at (5463.8,1500.0) mils Error 46 -- Unconnected pin: * Pad E1-48 at (5365.4,1500.0) mils Error 47 -- Unconnected pin: * Pad E1-49 at (5463.8,1500.0) mils Error 48 -- Unconnected pin: * Pad E1-13 at (4381.1,1500.0) mils Error 49 -- Unconnected pin: * Pad E1-38 at (4381.1,1500.0) mils Error 50 -- Unconnected pin: * Pad E1-22 at (5266.9,1500.0) mils Error 51 -- Unconnected pin: * Pad E1-44 at (4971.7,1500.0) mils Error 52 -- Unconnected pin: * Pad E1-47 at (5266.9,1500.0) mils 0 warning(s) detected. 52 error(s) detected. Warning: Net length violation tests were not performed because of missing MinNetLength and MaxNetLength rules. NETLIST LENGTH VIOLATIONS: 0 warning(s) detected. 0 error(s) detected. TEXT VIOLATIONS: 0 warning(s) detected. 0 error(s) detected. WIDTH VIOLATIONS: Warning: Width violation tests were not performed because of missing Width rule. 0 warning(s) detected. 0 error(s) detected. COPPER POUR VIOLATIONS: Error 53 -- Clearance Violation between: * Copper Pour at (3000.0,1800.0),(5800.0,1800.0),(5800.0,3600.0),...mils [To p layer] * Line Keepout at (5850.0,2500.0):(5800.0,3800.0) mils [All layer] * Calculated Clearance: 0.0mil. * Rule: Error 54 -- Clearance Violation between: ---------------------------------------------------------------------- 09-Feb-05 19:32 Page 4 P-CAD Design Rule Check Report ====================================================================== * Copper Pour at (3000.0,1800.0),(5800.0,1800.0),(5800.0,3600.0),...mils [Bo ttom layer] * Line Keepout at (5850.0,2500.0):(5800.0,3800.0) mils [All layer] * Calculated Clearance: 0.0mil. * Rule: 0 warning(s) detected. 2 error(s) detected. PLANE VIOLATIONS: 0 warning(s) detected. 0 error(s) detected. COMPONENT VIOLATIONS: 0 warning(s) detected. 0 error(s) detected. DRILL VIOLATIONS: Error 55 -- Hole Clearance Violation between: * Via VIA28 at 3450.0mil 2420.0mil and * Via VIA28 at 3450.0mil 2420.0mil. * Calculated clearance: 0.0mil. * Rule: Design.HoleToHoleClearance=13.0mil 0 warning(s) detected. 1 error(s) detected. DRC Summary: ------------ Netlist Compare: Errors: 0 Warnings: 0 Netlist: Errors: 0 Warnings: 0 Ignored Errors: 0 Clearance: Errors: 0 Warnings: 0 Ignored Errors: 0 Unrouted Nets: Errors: 0 Warnings: 0 Ignored Errors: 0 Unconnected Pins: Errors: 52 Warnings: 0 Ignored Errors: 0 Net Length: Errors: 0 ---------------------------------------------------------------------- 09-Feb-05 19:32 Page 5 P-CAD Design Rule Check Report ====================================================================== Warnings: 0 Ignored Errors: 0 Text: Errors: 0 Warnings: 0 Ignored Errors: 0 Width: Errors: 0 Warnings: 0 Ignored Errors: 0 Copper Pour: Errors: 2 Warnings: 0 Ignored Errors: 0 Plane: Errors: 0 Warnings: 0 Ignored Errors: 0 Component: Errors: 0 Warnings: 0 Ignored Errors: 0 Drilling: Errors: 1 Warnings: 0 Ignored Errors: 0 ---------------------------------------------------------------------- 09-Feb-05 19:32 Page 6